NEW POSITION - 10/7/2011
Hourly Rate Range: $40 - $42 per hour
Industrial Engineer II
Number needed: 1
Shift: Will need to work any shift assigned
Status: Manager reviewing resumes. Will close this req on 10/28.
NEW POSITION - 10/7/2011
Hourly Rate Range:
$33 - 35 per hour
Industrial Engineer I
Number needed: 1
Shift: Will need to work any shift assigned
Status: Manager reviewing resumes.
NEW POSITION - 9/30/2011
Hourly Rate Range:
$65 - $70 per hour
TS III - Electronics Systems Engineer
Number needed: 1
Shift: Will need to work any shift assigned
Knowledge of AC 25-11A (Display and Warning Standards) is a must.
Experience with integrated crew alerting and warning systems.
Experience testing, documenting, and closing Problem Reports for an
integrated avionics system
Fly by wire and autopilot development experience is a plus.
Experience with Honeywell Epic or similar Avionics and Flight Management
System.
NEW POSITION - 9/16/2011
Hourly Rate Range:
$50 - $52 per hour
Engineering Checker II -Catia V4 and/or V5
Number needed: 1
Shift: Will need to work any shift assigned
Status: Manager reviewing resumes. Made offer today. If accepted
next week, will close req on 10/27.
NEW POSITION - 9/9/2011
Hourly Rate Range:
$55 - $58 per hour
TS II - Final Phase Engineer - Mechanical
Number needed: 1
Shift: Will need to work any shift assigned
STATUS: Manager reviewing resumes. Made offer today. If accepted next
week, will close req on 10/27.
NEW POSITION - 8/12/11
Hourly Rate Range:
$59 - $62 per hour
TS II - Flight Controls Engineer
Number needed: 3
Shift: Will need to work any shift assigned
STATUS: Manager reviewing resumes. Need more resumes for manager to
review.
NEW POSITION - 5/13/2011
Hourly Rate Range:
$61 - $64 per hour
TS I - Systems and Powerplant Flight Test Engineer
Number needed: 3
Shift: Will need to work any shift assigned
STATUS: Manager reviewing resumes.
NEW POSITION - 5/13/2011
Hourly Rate Range:
$61 - $64 per hour
TS I - Aerodynamics - Flight Test Engineer
Number needed: 1
Shift: Will need to work any shift assigned
STATUS: Manager reviewing resumes.
NEW POSITION - 5/6/2011
Hourly Rate Range:
$58 - $61 per hour
Electrical Component Installation Engineer
Number needed: 1
Shift: Will need to work any shift assigned
STATUS: Manager reviewing resumes.
Applicant shall: Develop secondary structure, equipment and racks/panels to support the installation of Electrical Components. Have a working knowledge of Electrical Wiring Interconnect System (EWIS) as well as latest DO-160 requirements, internal/external lighting, antenna installations and other unique Electrical Installation requirements. CATIA V5 Work Bench capabilities should include Sheet Metal, part design and limited surfacing.
NEW POSITION - 5/6/2011
Hourly Rate Range:
$58 - 61 per hour
Flight Deck and Furnishings Engineer
Number needed: 3
Shift: Will need to work any shift assigned
STATUS: STATUS: Manager reviewing resumes.
Applicant shall: Develop secondary structure and installations to support Flight Deck equipment while considering the appropriate Human Factor Elements. Have a working knowledge of equipment qualification process of DO-160, Safety Equipment Installation and Electrical Wiring Interconnect System (EWIS). CATIA V5 Work Bench capabilities should include Sheet Metal, Part Design and limited surfacing (advanced surfacing a plus.)
NEW POSITION - 4/29/2011
Hourly Rate Range:
$34 per hour
Technical Writer Sr.
Number needed: 2
Shift: Will need to work any shift assigned
STATUS: Manager reviewing resumes.
NEW POSITION - 4/1/2011
Hourly Rate Range:
$58 - $62 per hour
Electrical Harness Install Engineer
Number needed: 5
Shift: Will need to work any shift assigned
STATUS: Manager reviewing resumes.
Applicant shall: Develop Electrical Wiring Interconnect System (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing the CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, system and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
NEW POSITION - 10/25/2010
Hourly Rate Range:
$58 - $61 per hour
MRB Engineer
Number needed: 2 (1 with Catia V4 and 1 with Catia V5 / SmarTeam
experience)
Shift: Will need to work any shift assigned
STATUS: Manager reviewing resumes and doing phone interviews.
NOTE: Aircraft Structural MRB Engineers background required
